Contacting BBr3-based boron emitters with Aluminium-free screen-printing paste

Lade...
Vorschaubild
Dateien
Fritz_0-374031.pdf
Fritz_0-374031.pdfGröße: 1.39 MBDownloads: 313
Datum
2016
Herausgeber:innen
Kontakt
ISSN der Zeitschrift
Electronic ISSN
ISBN
Bibliografische Daten
Verlag
Schriftenreihe
Auflagebezeichnung
ArXiv-ID
Internationale Patentnummer
Link zur Lizenz
Angaben zur Forschungsförderung
Projekt
Open Access-Veröffentlichung
Open Access Gold
Sammlungen
Core Facility der Universität Konstanz
Gesperrt bis
Titel in einer weiteren Sprache
Forschungsvorhaben
Organisationseinheiten
Zeitschriftenheft
Publikationstyp
Zeitschriftenartikel
Publikationsstatus
Published
Erschienen in
Energy Procedia. 2016, 92, pp. 925-931. eISSN 1876-6102. Available under: doi: 10.1016/j.egypro.2016.07.103
Zusammenfassung

For n-type solar cell concepts, B emitters are commonly diffused in a BBr3-based process. However, the metallization of these p+ layers is challenging. Up to now, low contact resistances on B emitters were only reported to be possible using Al-containing Ag screen-printing pastes. A drawback of the addition of Al to the paste is that, facilitated by the Al, deep metal spikes grow into the Si surface. As these spikes are deep enough to penetrate the emitter and affect the space charge region, they are made responsible for low Voc values that limit solar cell efficiency. However, in 2015 Engelhardt et al. reported specific contact resistances around 1 mΩcm2 of Al-free Ag screen-printed contacts on B emitters diffused by inductively coupled plasma plasma enhanced chemical vapour deposited SiOx:B layers. In their process the doping layer remained on the wafer serving as surface passivation layer. The low contact resistances were attributed to the presence of the doping layer. In this work we use two Al-free Ag screen-printing pastes for contacting a BBr3-based B emitter. Specific contact resistances well below 10 mΩcm2 are reached on alkaline textured wafers with dielectric layer. It is shown that with the use of Al-free Ag screen-printing pastes deep spiking can be avoided and therefore a wider window of firing parameters is available. These results allow the use of the same screen-printing paste on both sides of the solar cell. Additionally it is shown, that with an old generation Al-free Ag paste low specific contact resistances can only be achieved in a narrow firing window at low temperatures. The addition of Te to the old generation paste shifts and broadens the temperature range for which low specific contact resistances are reached to higher firing temperatures.

Zusammenfassung in einer weiteren Sprache
Fachgebiet (DDC)
530 Physik
Schlagwörter
Konferenz
Rezension
undefined / . - undefined, undefined
Zitieren
ISO 690FRITZ, Susanne, Erkan EMRE, Josh ENGELHARDT, Stefanie EBERT, Nicolas NOWAK, Jonathan BOOTH, Giso HAHN, 2016. Contacting BBr3-based boron emitters with Aluminium-free screen-printing paste. In: Energy Procedia. 2016, 92, pp. 925-931. eISSN 1876-6102. Available under: doi: 10.1016/j.egypro.2016.07.103
BibTex
@article{Fritz2016Conta-36121,
  year={2016},
  doi={10.1016/j.egypro.2016.07.103},
  title={Contacting BBr<sub>3</sub>-based boron emitters with Aluminium-free screen-printing paste},
  volume={92},
  journal={Energy Procedia},
  pages={925--931},
  author={Fritz, Susanne and Emre, Erkan and Engelhardt, Josh and Ebert, Stefanie and Nowak, Nicolas and Booth, Jonathan and Hahn, Giso}
}
RDF
<rdf:RDF
    xmlns:dcterms="http://purl.org/dc/terms/"
    xmlns:dc="http://purl.org/dc/elements/1.1/"
    xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
    xmlns:bibo="http://purl.org/ontology/bibo/"
    xmlns:dspace="http://digital-repositories.org/ontologies/dspace/0.1.0#"
    xmlns:foaf="http://xmlns.com/foaf/0.1/"
    xmlns:void="http://rdfs.org/ns/void#"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema#" > 
  <rdf:Description rdf:about="https://kops.uni-konstanz.de/server/rdf/resource/123456789/36121">
    <dc:creator>Engelhardt, Josh</dc:creator>
    <dc:contributor>Fritz, Susanne</dc:contributor>
    <dc:contributor>Engelhardt, Josh</dc:contributor>
    <void:sparqlEndpoint rdf:resource="http://localhost/fuseki/dspace/sparql"/>
    <dcterms:title>Contacting BBr&lt;sub&gt;3&lt;/sub&gt;-based boron emitters with Aluminium-free screen-printing paste</dcterms:title>
    <dc:creator>Booth, Jonathan</dc:creator>
    <dc:contributor>Hahn, Giso</dc:contributor>
    <dc:rights>Attribution-NonCommercial-NoDerivatives 4.0 International</dc:rights>
    <dc:date rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2016-11-29T13:32:54Z</dc:date>
    <dcterms:issued>2016</dcterms:issued>
    <dcterms:isPartOf rdf:resource="https://kops.uni-konstanz.de/server/rdf/resource/123456789/41"/>
    <dc:creator>Ebert, Stefanie</dc:creator>
    <dc:contributor>Booth, Jonathan</dc:contributor>
    <foaf:homepage rdf:resource="http://localhost:8080/"/>
    <dc:creator>Emre, Erkan</dc:creator>
    <dcterms:hasPart rdf:resource="https://kops.uni-konstanz.de/bitstream/123456789/36121/3/Fritz_0-374031.pdf"/>
    <dc:language>eng</dc:language>
    <dc:contributor>Emre, Erkan</dc:contributor>
    <dc:creator>Nowak, Nicolas</dc:creator>
    <dc:contributor>Ebert, Stefanie</dc:contributor>
    <dcterms:available rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2016-11-29T13:32:54Z</dcterms:available>
    <dc:creator>Fritz, Susanne</dc:creator>
    <bibo:uri rdf:resource="https://kops.uni-konstanz.de/handle/123456789/36121"/>
    <dcterms:abstract xml:lang="eng">For n-type solar cell concepts, B emitters are commonly diffused in a BBr3-based process. However, the metallization of these p+ layers is challenging. Up to now, low contact resistances on B emitters were only reported to be possible using Al-containing Ag screen-printing pastes. A drawback of the addition of Al to the paste is that, facilitated by the Al, deep metal spikes grow into the Si surface. As these spikes are deep enough to penetrate the emitter and affect the space charge region, they are made responsible for low Voc values that limit solar cell efficiency. However, in 2015 Engelhardt et al. reported specific contact resistances around 1 mΩcm2 of Al-free Ag screen-printed contacts on B emitters diffused by inductively coupled plasma plasma enhanced chemical vapour deposited SiOx:B layers. In their process the doping layer remained on the wafer serving as surface passivation layer. The low contact resistances were attributed to the presence of the doping layer. In this work we use two Al-free Ag screen-printing pastes for contacting a BBr3-based B emitter. Specific contact resistances well below 10 mΩcm2 are reached on alkaline textured wafers with dielectric layer. It is shown that with the use of Al-free Ag screen-printing pastes deep spiking can be avoided and therefore a wider window of firing parameters is available. These results allow the use of the same screen-printing paste on both sides of the solar cell. Additionally it is shown, that with an old generation Al-free Ag paste low specific contact resistances can only be achieved in a narrow firing window at low temperatures. The addition of Te to the old generation paste shifts and broadens the temperature range for which low specific contact resistances are reached to higher firing temperatures.</dcterms:abstract>
    <dc:contributor>Nowak, Nicolas</dc:contributor>
    <dspace:isPartOfCollection rdf:resource="https://kops.uni-konstanz.de/server/rdf/resource/123456789/41"/>
    <dspace:hasBitstream rdf:resource="https://kops.uni-konstanz.de/bitstream/123456789/36121/3/Fritz_0-374031.pdf"/>
    <dcterms:rights rdf:resource="http://creativecommons.org/licenses/by-nc-nd/4.0/"/>
    <dc:creator>Hahn, Giso</dc:creator>
  </rdf:Description>
</rdf:RDF>
Interner Vermerk
xmlui.Submission.submit.DescribeStep.inputForms.label.kops_note_fromSubmitter
Kontakt
URL der Originalveröffentl.
Prüfdatum der URL
Prüfungsdatum der Dissertation
Finanzierungsart
Kommentar zur Publikation
Allianzlizenz
Corresponding Authors der Uni Konstanz vorhanden
Internationale Co-Autor:innen
Universitätsbibliographie
Ja
Begutachtet
Diese Publikation teilen