Dielectric rear side passivation on Ribbon Growth on Substrate (RGS) solar cells

Lade...
Vorschaubild
Dateien
Hess_160137.pdf
Hess_160137.pdfGröße: 249.1 KBDownloads: 53
Datum
2010
Autor:innen
Herausgeber:innen
Kontakt
ISSN der Zeitschrift
Electronic ISSN
ISBN
Bibliografische Daten
Verlag
Schriftenreihe
Auflagebezeichnung
ArXiv-ID
Internationale Patentnummer
Angaben zur Forschungsförderung
Projekt
Open Access-Veröffentlichung
Open Access Green
Sammlungen
Core Facility der Universität Konstanz
Gesperrt bis
Titel in einer weiteren Sprache
Forschungsvorhaben
Organisationseinheiten
Zeitschriftenheft
Publikationstyp
Beitrag zu einem Konferenzband
Publikationsstatus
Published
Erschienen in
DE SANTI, G.F., ed., H. OSSENBRINK, ed., P. HELM, ed.. 25th European Photovoltaic Solar Energy Conference and Exhibition. 5th World Conference on photovoltaic Energy Conversion. München: WIP Renewable Energies, 2010, pp. 2233-2236. Available under: doi: 10.4229/25thEUPVSEC2010-2CV.3.44
Zusammenfassung

Ribbon Growth on Substrate (RGS) silicon wafers are cast directly from the melt onto reusable substrates. With a high production speed in the order of one wafer per second and the avoidance of material loss due to wire-sawing like in the block-casting technology, RGS is a cost-effective material. The wafers are multicrystalline with typical grain sizes between 0.1 mm to 1 mm. Up to now, the adapted solar cell process contained an open rear side metallization realized by an Al-grid [1]. This had to be implemented because of increased process induced shunting in cell areas with Al back side metallization. For rear side passivation and avoidance of possible shunting, two new cell back side designs are tested and compared to the RGS baseline process. In this work, silicon carbide as a dielectric passivation layer and its properties regarding a co-firing temperature step and the application of such a layer in the RGS solar cell process is investigated. It is found that a cell process for RGS containing a dielectric layer on the cell rear side in connection with Laser Fired Contacts (LFCs) enhances the cell performance by reducing the area of possibly contacted shunting paths further and thus increasing the parallel resistance of the solar cells. The gain in efficiency is hereby less attributed to the improved rear side passivation quality for this material with a limited diffusion length.

Zusammenfassung in einer weiteren Sprache
Fachgebiet (DDC)
530 Physik
Schlagwörter
Laser Processing, Ribbon Silicon, Silicon Carbide
Konferenz
25th European Photovoltaic Solar Energy Conference and Exhibition. 5th World Conference on photovoltaic Energy Conversion, 6. Sep. 2010 - 10. Sep. 2010, Valencia, Spain
Rezension
undefined / . - undefined, undefined
Zitieren
ISO 690HESS, Uwe, Sebastian JOOS, Johannes JUNGE, Sven SEREN, Giso HAHN, T. WEBER, P.-Y. PICHON, Axel SCHÖNECKER, 2010. Dielectric rear side passivation on Ribbon Growth on Substrate (RGS) solar cells. 25th European Photovoltaic Solar Energy Conference and Exhibition. 5th World Conference on photovoltaic Energy Conversion. Valencia, Spain, 6. Sep. 2010 - 10. Sep. 2010. In: DE SANTI, G.F., ed., H. OSSENBRINK, ed., P. HELM, ed.. 25th European Photovoltaic Solar Energy Conference and Exhibition. 5th World Conference on photovoltaic Energy Conversion. München: WIP Renewable Energies, 2010, pp. 2233-2236. Available under: doi: 10.4229/25thEUPVSEC2010-2CV.3.44
BibTex
@inproceedings{He2010Diele-16013,
  year={2010},
  doi={10.4229/25thEUPVSEC2010-2CV.3.44},
  title={Dielectric rear side passivation on Ribbon Growth on Substrate (RGS) solar cells},
  publisher={WIP Renewable Energies},
  address={München},
  booktitle={25th European Photovoltaic Solar Energy Conference and Exhibition. 5th World Conference on photovoltaic Energy Conversion},
  pages={2233--2236},
  editor={de Santi, G.F. and Ossenbrink, H. and Helm, P.},
  author={Heß, Uwe and Joos, Sebastian and Junge, Johannes and Seren, Sven and Hahn, Giso and Weber, T. and Pichon, P.-Y. and Schönecker, Axel}
}
RDF
<rdf:RDF
    xmlns:dcterms="http://purl.org/dc/terms/"
    xmlns:dc="http://purl.org/dc/elements/1.1/"
    xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
    xmlns:bibo="http://purl.org/ontology/bibo/"
    xmlns:dspace="http://digital-repositories.org/ontologies/dspace/0.1.0#"
    xmlns:foaf="http://xmlns.com/foaf/0.1/"
    xmlns:void="http://rdfs.org/ns/void#"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema#" > 
  <rdf:Description rdf:about="https://kops.uni-konstanz.de/server/rdf/resource/123456789/16013">
    <dspace:isPartOfCollection rdf:resource="https://kops.uni-konstanz.de/server/rdf/resource/123456789/41"/>
    <dc:creator>Joos, Sebastian</dc:creator>
    <dc:date rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2011-10-05T09:23:01Z</dc:date>
    <dc:creator>Junge, Johannes</dc:creator>
    <dcterms:title>Dielectric rear side passivation on Ribbon Growth on Substrate (RGS) solar cells</dcterms:title>
    <dc:contributor>Seren, Sven</dc:contributor>
    <foaf:homepage rdf:resource="http://localhost:8080/"/>
    <dcterms:issued>2010</dcterms:issued>
    <dcterms:hasPart rdf:resource="https://kops.uni-konstanz.de/bitstream/123456789/16013/2/Hess_160137.pdf"/>
    <dc:creator>Hahn, Giso</dc:creator>
    <dcterms:available rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2011-10-05T09:23:01Z</dcterms:available>
    <dc:contributor>Hahn, Giso</dc:contributor>
    <dc:creator>Heß, Uwe</dc:creator>
    <dc:creator>Pichon, P.-Y.</dc:creator>
    <dc:rights>terms-of-use</dc:rights>
    <dcterms:abstract xml:lang="eng">Ribbon Growth on Substrate (RGS) silicon wafers are cast directly from the melt onto reusable substrates. With a high production speed in the order of one wafer per second and the avoidance of material loss due to wire-sawing like in the block-casting technology, RGS is a cost-effective material. The wafers are multicrystalline with typical grain sizes between 0.1 mm to 1 mm. Up to now, the adapted solar cell process contained an open rear side metallization realized by an Al-grid [1]. This had to be implemented because of increased process induced shunting in cell areas with Al back side metallization. For rear side passivation and avoidance of possible shunting, two new cell back side designs are tested and compared to the RGS baseline process. In this work, silicon carbide as a dielectric passivation layer and its properties regarding a co-firing temperature step and the application of such a layer in the RGS solar cell process is investigated. It is found that a cell process for RGS containing a dielectric layer on the cell rear side in connection with Laser Fired Contacts (LFCs) enhances the cell performance by reducing the area of possibly contacted shunting paths further and thus increasing the parallel resistance of the solar cells. The gain in efficiency is hereby less attributed to the improved rear side passivation quality for this material with a limited diffusion length.</dcterms:abstract>
    <dc:creator>Seren, Sven</dc:creator>
    <dc:contributor>Joos, Sebastian</dc:contributor>
    <dspace:hasBitstream rdf:resource="https://kops.uni-konstanz.de/bitstream/123456789/16013/2/Hess_160137.pdf"/>
    <dc:contributor>Weber, T.</dc:contributor>
    <dc:language>eng</dc:language>
    <dcterms:isPartOf rdf:resource="https://kops.uni-konstanz.de/server/rdf/resource/123456789/41"/>
    <dc:contributor>Heß, Uwe</dc:contributor>
    <dc:contributor>Schönecker, Axel</dc:contributor>
    <dc:contributor>Junge, Johannes</dc:contributor>
    <void:sparqlEndpoint rdf:resource="http://localhost/fuseki/dspace/sparql"/>
    <bibo:uri rdf:resource="http://kops.uni-konstanz.de/handle/123456789/16013"/>
    <dc:creator>Schönecker, Axel</dc:creator>
    <dc:contributor>Pichon, P.-Y.</dc:contributor>
    <dcterms:rights rdf:resource="https://rightsstatements.org/page/InC/1.0/"/>
    <dc:creator>Weber, T.</dc:creator>
    <dcterms:bibliographicCitation>Publ. in: 25th European Photovoltaic Solar Energy Conference and Exhibition. 5th World Conference on photovoltaic Energy Conversion : proceedings of the international conference held 6-10 September 2010, in Valencia, Spain / G.F. de Santi, H. Ossenbrink and P. Helm (eds.). Munich, Germany : WIP-Renewable Energies, 2010. pp. 2223-2226</dcterms:bibliographicCitation>
  </rdf:Description>
</rdf:RDF>
Interner Vermerk
xmlui.Submission.submit.DescribeStep.inputForms.label.kops_note_fromSubmitter
Kontakt
URL der Originalveröffentl.
Prüfdatum der URL
Prüfungsdatum der Dissertation
Finanzierungsart
Kommentar zur Publikation
Allianzlizenz
Corresponding Authors der Uni Konstanz vorhanden
Internationale Co-Autor:innen
Universitätsbibliographie
Ja
Begutachtet
Diese Publikation teilen