TU Darmstadt / ULB / TUprints

Thermal Action on Normal and High Strength Cement Mortars

Ripani, Marianela ; Xargay, Hernán ; Iriarte, Ignacio ; Bernardo, Kevin ; Caggiano, Antonio ; Folino, Paula (2022)
Thermal Action on Normal and High Strength Cement Mortars.
In: Applied Sciences, 2022, 10 (18)
doi: 10.26083/tuprints-00015970
Article, Secondary publication, Publisher's Version

[img]
Preview
Text
applsci-10-06455-v2.pdf
Copyright Information: CC BY 4.0 International - Creative Commons, Attribution.

Download (36MB) | Preview
Item Type: Article
Type of entry: Secondary publication
Title: Thermal Action on Normal and High Strength Cement Mortars
Language: English
Date: 2022
Place of Publication: Darmstadt
Year of primary publication: 2022
Publisher: MDPI
Journal or Publication Title: Applied Sciences
Volume of the journal: 10
Issue Number: 18
Collation: 19 Seiten
DOI: 10.26083/tuprints-00015970
Corresponding Links:
Origin: Secondary publication DeepGreen
Abstract:

High temperature effect on cement-based composites, such as concrete or mortars, represents one of the most important damaging process that may drastically affect the mechanical and durability characteristics of structures. In this paper, the results of an experimental campaign on cement mortars submitted to high temperatures are reported and discussed. Particularly, two mixtures (i.e., Normal (MNS) and High Strength Mortar (MHS)) having different water-to-binder ratios were designed and evaluated in order to investigate the incidence of both the mortar composition and the effects of thermal treatments on their physical and mechanical properties. Mortar specimens were thermally treated in an electrical furnace, being submitted to the action of temperatures ranging from 100 to 600 °C. After that and for each mortar quality and considered temperature, including the room temperature case of 20 °C, water absorption was measured by following a capillary water absorption test. Furthermore, uniaxial compression, splitting tensile and three-points bending tests were performed under residual conditions. A comparative analysis of the progressive damage caused by temperature on physical and mechanical properties of the considered mortars types is presented. On one hand, increasing temperatures produced increasing water absorption coefficients, evidencing the effect of thermal damages which may cause an increase in the mortars accessible porosity. However, under these circumstances, the internal porosity structure of lower w/b ratio mixtures results much more thermally-damaged than those of MNS. On the other hand, strengths suffered a progressive degradation due to temperature rises. While at low to medium temperatures, strength loss resulted similar for both mortar types, at higher temperature, MNS presented a relatively greater strength loss than that of MHS. The action of temperature also caused in all cases a decrease of Young’s Modulus and an increase in the strain corresponding to peak load. However, MHS showed a much more brittle behavior in comparison with that of MNS, for all temperature cases. Finally, the obtained results demonstrated that mortar quality cannot be neglected when the action of temperature is considered, being the final material performance dependent on the physical properties which, in turn, mainly depend on the mixture proportioning.

Uncontrolled Keywords: temperature effects, cement mortar, normal strength mortar, high strength mortar, water absorption, mechanical behavior
Status: Publisher's Version
URN: urn:nbn:de:tuda-tuprints-159705
Classification DDC: 600 Technology, medicine, applied sciences > 620 Engineering and machine engineering
Divisions: 13 Department of Civil and Environmental Engineering Sciences > Institute of Construction and Building Materials
Date Deposited: 09 Feb 2022 14:59
Last Modified: 07 Mar 2023 07:32
SWORD Depositor: Deep Green
URI: https://tuprints.ulb.tu-darmstadt.de/id/eprint/15970
PPN: 505567350
Export:
Actions (login required)
View Item View Item